Иконка ресурса

Reunion 0.2.0.13

Перейти к загрузке
Обзор Установка и настройка Обновления (6) Рецензии (2) Обсуждение
S

Stas

Сообщения
148
Реакции
48
Помог
4 раз(а)
Форумчане, установил версию 133 и, как говорили раньше, тоже столкнулся с отображением сервера в ПУ сервачка. В КСбанс отображался сервер корректно, а в ПУ нет(
# ========================================================
# REUNION CONFIGURATION
# ========================================================

#
# General rule for modifying this file:
# DONT CHANGE ANYTHING IF YOU DONT KNOW WHAT IT MEANS!
#


# ========================================================
# AUTHID MANAGEMENT
# ========================================================

# ClientID types (for cid_* options)
# 1: Real (or generated by HW) steam (STEAM_xx:xx:xx)
# 2: Real (or generated by HW) valve (VALVE_xx:xx:xx)
# 3: STEAM_ by IP
# 4: VALVE_ by IP
# 5: Deprecated - client will be rejected
# 6: reserved for future use
# 7: HLTV
# 8: STEAM_ID_LAN
# 9: STEAM_ID_PENDING
# 10: VALVE_ID_LAN
# 11: VALVE_ID_PENDING
# 12: STEAM_666:88:666

# Use these options to set authid's for clients

### AUTH CONTROL ###

# For Legit Steam clients (default is real STEAM_xx:xx:xx [1])
cid_Steam = 1

# Client recognized as pending when they sucessfully authorized, but did not get steam id
# REMARK: Actually, it got steamid, but it is useless (STEAM_0:0:0 for example)
# default is STEAM_ID_PENDING [9]
cid_SteamPending = 3

# for HLTV (default is HLTV [7])
cid_HLTV = 5

# for p.47 clients that do not support unique id generation (default is STEAM_ID_LAN [8])
cid_NoSteam47 = 3

# for p.48 clients that do not support unique id generation (default is VALVE_ID_LAN [10])
cid_NoSteam48 = 3

# For players having revEmu ( >= 9.74) on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_RevEmu = 1

# For players having RevEmu 2013 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_RevEmu2013 = 1

# For players having SteamClient 2009 / revEmu > 9.82 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SC2009 = 1

# For players having old revEmu on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_OldRevEmu = 1

# For players having hCupa's SteamEmu on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SteamEmu = 1

# For players having AVSMP (Cracked Steam) on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_AVSMP = 1

# For SETTI ServerScanner
# default is STEAM_xx:xx:xx generated by IP [3]
cid_Setti = 3

# For SXEI Clients
# default is real STEAM_xx:xx:xx [1]
cid_SXEI = 1

# For players having SmartSteamEmu > 1.2.4 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SSE3 = 1


### AUTH SETTINGS ###

# Authorization protocols version. All steamdid's of non-steams players will be changed in common with this value.
# 1: DProto (deprecated)
# 2: Reunion 2015-2018
# 3: Reunion new (recommended)
AuthVersion = 3

# SteamIdHashSalt (string)
# Salt string for SteamIDs hashing. Irreversibly changes SteamIDs. Applies only to SteamIDs generated by emulators.
# Should be more than 16 chars length. If string is empty, hashing is not applied.
SteamIdHashSalt = f83hyf847fy893yjf89sdyf9h834y8hnfysdf

# SC2009_RevCompatMode (0 / 1)
# Enable fix to make steamids generated for SC2009 compatible with revEmu. Can't be disabled with AuthVersion >= 3.
# Default: 1
SC2009_RevCompatMode = 1

# EnableSXEIdGeneration (0 / 1)
# Turns on steamid generation based on info sent by sXeI client
# Enable this ONLY if you have sXeI server installed!
# Default: 0
EnableSXEIdGeneration = 0

# EnableGenPrefix2 (0 / 1)
# Enable second prefix (STEAM_*:0/1:****) for generated authids. Reduces chance of authid collisions. Works only with configured SteamIdHashSalt. Can't be disabled with AuthVersion >= 3.
# Default: 0
EnableGenPrefix2 = 0

# HLTVExcept_IP (ip addr)
# HLTV from this IP will be able to join the server even if cid_HLTV is set to 5 (deprecated)
HLTVExcept_IP = 127.0.0.1


### AUTHID PREFIXES ###

# This config section will be ignored when AuthVersion > 2.

# IPGen_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by IP
IPGen_Prefix1 = 0

# IPGen_Prefix2 (int)
# STEAM_a:b:c
# second prefix (b) for authids generated by IP
IPGen_Prefix2 = 4

# Native_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by native auth method (Steam)
Native_Prefix1 = 0;

# RevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by Steamclient 2009
SC2009_Prefix1 = 1;

# RevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by RevEmu
RevEmu_Prefix1 = 1;

# RevEmu2013_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by RevEmu2013
RevEmu2013_Prefix1 = 1;

# OldRevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by old RevEmu
OldRevEmu_Prefix1 = 2;

# SteamEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by SteamEmu
SteamEmu_Prefix1 = 3;

# SteamEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for AVSMP Clients (Cracked steam)
AVSMP_Prefix1 = 4;

# Setti_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for Setti server scanner
Setti_Prefix1 = 5;

# SXEI_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for sXeI clients
SXEI_Prefix1 = 6;

# SSE3_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for SSE3
SSE3_Prefix1 = 7;

# Note that banid will use steamid WITHOUT any prefixes!



# ========================================================
# SERVER QUERIES MANAGEMENT
# ========================================================

# ServerInfoAnswerType (0/1/2)
# Sets server answer type for query requests
# 0 = New style (Source Engine)
# 1 = Old Style (Fix favorites list for p.47 clients)
# 2 = Hybrid mode - Server is visible anywhere, but there are 3 packets generated for every serverinfo request
# Default: 0
ServerInfoAnswerType = 2

# FixBuggedQuery (0 / 1)
# Enable fix for clients with bugged serverbrowser. Prevents hanging on connect.
# Default: 1
FixBuggedQuery = 1

# EnableQueryLimiter (0 / 1)
# Enable ratelimit for server queries (TSource, players, etc). You can use 0 if external protection solutions used.
# Default: 1
EnableQueryLimiter = 1

# QueryRateLimit (128/2048)
# Global rate limit for server queries in packets/sec.
# Default: 256
QueryRateLimit = 256

# QueryFloodBanTime (1 - 60)
# Ban time in minutes for server query flooding.
# Default: 10
QueryFloodBanTime = 30

# LogAttacks (0 / 1)
# Log attacks to reunion_attacks.log
# Default: 1
LogAttacks = 1

# AllowSplitPackets (0 / 1)
# Allow splitting of outgoing packets if they size are greater than 1400. Used in original steamclient, but does not supported by some monitorings.
# Default: 0
AllowSplitPackets = 0

# IPClientsLimit (0 - 32)
# Maximum number of clients from single ip. Useful for computer clubs.
# Default: 5
IPClientsLimit = 5


# ========================================================
# OTHER STUFF
# ========================================================

# LoggingMode:
# 0 = None
# 1 = Console
# 2 = Log Files
# 3 = Both
LoggingMode = 2
Значение
# EnableQueryLimiter (0 / 1)
# Enable ratelimit for server queries (TSource, players, etc). You can use 0 if external protection solutions used.
# Default: 1
EnableQueryLimiter = 1
Нажмите для раскрытия...
выставлял 0 и не помогло. Пришлось откатиться к версии 92.
 
DrStrange

DrStrange

Сообщения
213
Реакции
71
Помог
2 раз(а)
download picture on forum. not a others sites.
Edited Thread As Moderator Asked !!! [As Per Rules]
Thank You For Guiding !!!

I'm using .133 Version and recently I have realised, No Steam Users are reported by game servers, even steamers are playing too in server at that time. [as shown in SS], hence when we click view players, No Steam Players are shown !!! And other then this some steam players avatar is shown and some not !! Kindly Fix It. [May Be ReHLDS or ReUnion Issue]?

# ========================================================
# REUNION CONFIGURATION
# ========================================================

#
# General rule for modifying this file:
# DONT CHANGE ANYTHING IF YOU DONT KNOW WHAT IT MEANS!
#


# ========================================================
# AUTHID MANAGEMENT
# ========================================================

# ClientID types (for cid_* options)
# 1: Real (or generated by HW) steam (STEAM_xx:xx:xx)
# 2: Real (or generated by HW) valve (VALVE_xx:xx:xx)
# 3: STEAM_ by IP
# 4: VALVE_ by IP
# 5: Deprecated - client will be rejected
# 6: reserved for future use
# 7: HLTV
# 8: STEAM_ID_LAN
# 9: STEAM_ID_PENDING
# 10: VALVE_ID_LAN
# 11: VALVE_ID_PENDING
# 12: STEAM_666:88:666

# Use these options to set authid's for clients

### AUTH CONTROL ###

# For Legit Steam clients (default is real STEAM_xx:xx:xx [1])
cid_Steam = 1

# Client recognized as pending when they sucessfully authorized, but did not get steam id
# REMARK: Actually, it got steamid, but it is useless (STEAM_0:0:0 for example)
# default is Deprecated [5]
cid_SteamPending = 9

# for HLTV (default is Deprecated [5])
cid_HLTV = 5

# for p.47 clients that do not support unique id generation (default is Deprecated [5])
cid_NoSteam47 = 4

# for p.48 clients that do not support unique id generation (default is Deprecated [5])
cid_NoSteam48 = 3

# For players having revEmu ( >= 9.74) on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_RevEmu = 1

# For players having RevEmu 2013 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_RevEmu2013 = 1

# For players having SteamClient 2009 / revEmu > 9.82 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SC2009 = 1

# For players having old revEmu on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_OldRevEmu = 1

# For players having hCupa's SteamEmu on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SteamEmu = 1

# For players having AVSMP (Cracked Steam) on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_AVSMP = 1

# For SETTI ServerScanner
# default is STEAM_xx:xx:xx generated by IP [3]
cid_Setti = 3

# For SXEI Clients
# default is real STEAM_xx:xx:xx [1]
cid_SXEI = 1

# For players having SmartSteamEmu > 1.2.4 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SSE3 = 1


### AUTH SETTINGS ###

# Authorization protocols version. All steamdid's of non-steams players will be changed in common with this value.
# 1: DProto (deprecated)
# 2: Reunion 2015-2018
# 3: Reunion new (recommended)
AuthVersion = 2

# SteamIdHashSalt (string)
# Salt string for SteamIDs hashing. Irreversibly changes SteamIDs. Prevents SteamID stealing.
# Should be more than 16 chars length. If string is empty, hashing is not applied (AuthVersion < 3) or Reunion init will be failed (AuthVersion >= 3).
SteamIdHashSalt =

# SC2009_RevCompatMode (0 / 1)
# Enable fix to make steamids generated for SC2009 compatible with revEmu. Can't be disabled with AuthVersion >= 3.
# Default: 1
SC2009_RevCompatMode = 1

# EnableSXEIdGeneration (0 / 1)
# Turns on steamid generation based on info sent by sXeI client
# Enable this ONLY if you have sXeI server installed!
# Default: 0
EnableSXEIdGeneration = 0

# EnableGenPrefix2 (0 / 1)
# Enable second prefix (STEAM_*:0/1:****) for generated authids. Reduces chance of authid collisions. Works only with configured SteamIdHashSalt. Can't be disabled with AuthVersion >= 3.
# Default: 0
EnableGenPrefix2 = 0

# HLTVExcept_IP (ip addr)
# HLTV from this IP will be able to join the server even if cid_HLTV is set to 5 (deprecated)
HLTVExcept_IP = 127.0.0.1


### AUTHID PREFIXES ###

# This config section will be ignored when AuthVersion > 2.

# IPGen_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by IP
IPGen_Prefix1 = 0

# IPGen_Prefix2 (int)
# STEAM_a:b:c
# second prefix (b) for authids generated by IP
IPGen_Prefix2 = 4

# Native_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by native auth method (Steam)
Native_Prefix1 = 0;

# RevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by RevEmu
RevEmu_Prefix1 = 0;

# RevEmu2013_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by RevEmu2013
RevEmu2013_Prefix1 = 0;

# SC2009_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by Steamclient 2009
SC2009_Prefix1 = 1;

# OldRevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by old RevEmu
OldRevEmu_Prefix1 = 0;

# SteamEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by SteamEmu
SteamEmu_Prefix1 = 0;

# SteamEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for AVSMP Clients (Cracked steam)
AVSMP_Prefix1 = 4;

# Setti_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for Setti server scanner
Setti_Prefix1 = 5;

# SXEI_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for sXeI clients
SXEI_Prefix1 = 6;

# SSE3_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for SSE3
SSE3_Prefix1 = 7;

# Note that banid will use steamid WITHOUT any prefixes!



# ========================================================
# SERVER QUERIES MANAGEMENT
# ========================================================

# ServerInfoAnswerType (0/1/2)
# Sets server answer type for query requests
# 0 = New style (Steam) (recommended)
# 1 = Old Style (GoldSource Engine)
# 2 = Hybrid mode - Server is visible anywhere, but there are 3 packets generated for every serverinfo request
# Default: 0
ServerInfoAnswerType = 2

# FixBuggedQuery (0 / 1)
# Enable fix for clients with bugged serverbrowser. Prevents hanging on connect.
# Default: 1
FixBuggedQuery = 1

# EnableQueryLimiter (0 / 1)
# Enable ratelimit for server queries (TSource, players, etc). You can use 0 if external protection solutions used.
# Default: 1
EnableQueryLimiter = 1

# QueryRateLimit (128/2048)
# Global rate limit for server queries in packets/sec.
# Default: 256
QueryRateLimit = 256

# QueryFloodBanTime (0 - 60).
# Ban time in minutes for server query flooding. Use 0 to disable bans (block only).
# Default: 10
QueryFloodBanTime = 10

# LogAttacks (0 / 1)
# Log attacks to reunion_attacks.log
# Default: 1
LogAttacks = 1

# AllowSplitPackets (0 / 1)
# Allow splitting of outgoing packets if they size are greater than 1400. Used in original steamclient, but does not supported by some monitorings.
# Default: 0
AllowSplitPackets = 0

# IPClientsLimit (0 - 32)
# Maximum number of clients from single ip. Useful for computer clubs.
# Default: 5
IPClientsLimit = 5


# ========================================================
# OTHER STUFF
# ========================================================

# LoggingMode:
# 0 = None
# 1 = Console
# 2 = Log Files
# 3 = Both
LoggingMode = 2
 

Download all Attachments

Последнее редактирование:
S

s1ngle

Сообщения
188
Реакции
11
AuthVersion
Совместимость с Dproto. Генерирует Steam_ID старыми методомами как в Dproto или старом reunion всем Non-Steam клиентам, кроме Steamemu.
Внимание: SteamIdHashSalt должен совпадать.
какое значение тут надо выставлять? по дэфолту gproto(1)?
 
G

GIT

Сообщения
82
Реакции
6
Помог
2 раз(а)
Ребят , а версия 133 работает у кого-нибудь , пытаюсь обновиться с 92 , сервер не запускает модуль!
 
ifx

ifx

Сообщения
331
Реакции
153
Помог
4 раз(а)
GIT, вангую, что соль не прописана или старый билд rehlds
 
Алексеич

Алексеич

Сообщения
3,023
Реакции
1,731
Помог
79 раз(а)
ifx, чтобы не гадать, я попросил создать тему, где он должен выложить всю необходимую информацию. Не нужно в общей теме решать личные проблемы. Даже если знаешь решение вопроса. Спасибо за понимание :):crazy:
 
kaldun89

kaldun89

Сообщения
56
Реакции
46
Помог
1 раз(а)
Проблемы с подключением к серверу с 133 наблюдаются?
 
Z

ZTE

Сообщения
50
Реакции
24
Помог
2 раз(а)
present, Меня бы это не волновало если бы после этого сервер не ложился.
 
CannibaL86

CannibaL86

Сообщения
71
Реакции
30
Помог
6 раз(а)
s1ngle,
C++: 
# QueryFloodBanTime (0 - 60).
# Ban time in minutes for server query flooding.Use 0 to disable bans (block only).
# Default: 10
QueryFloodBanTime = 10
Use 0 to disable bans (block only)
 
kaldun89

kaldun89

Сообщения
56
Реакции
46
Помог
1 раз(а)
ZTE написал(а):
Все бы ничего, но это адрес где у меня установлена веб часть.
Нажмите для раскрытия...
Попробуйте в "addons/reauthcheck/reauthcheck.cfg" добавить:
Код: 
[List White IP]
109.248.59.110
Не уверен, что поможет, но попробовать стоит.

s1ngle написал(а):
CannibaL86, что значит блок онли?
Нажмите для раскрытия...
Код: 
# QueryFloodBanTime (0 - 60).
# Время бана в минутах для серверного флуда запросами. Используйте 0 для отключения бана (только блокировка).
# По умолчанию: 10
QueryFloodBanTime = 10
 
Последнее редактирование:
S

s1ngle

Сообщения
188
Реакции
11
kaldun89, банить не будет сразу бан навсегда? не понимаю только блокировка
 
Войдите или зарегистрируйтесь для ответа.

Пользователи, просматривающие эту тему

Сейчас на форуме нет ни одного пользователя.
Всего: 1 (пользователей: 0, гостей: 1)
Сверху Снизу