Иконка ресурса
Сообщения
313
Реакции
21
Помог
7 раз(а)
Обратите внимание, если вы хотите заключить сделку с этим пользователем, он заблокирован
SergeyPanov, чисто ради интереса, сделай так cid_RevEmu=3 и дай рестарт сервера и пусть зайти попробует.
Ну и пусть в консоль кс своей напишет version и вывод сюда.
 
Сообщения
330
Реакции
-24
kto-to, попробую этот вариант, с остальными игроками проблем не будет, при изменении данного квара? Проблема только у него
Protocol version 48
Exe version 1.1.2.7/Stdio (cstrike)
Exe build: 16:59:50 Nov 8 2022 (9511)
] version
 
Сообщения
313
Реакции
21
Помог
7 раз(а)
Обратите внимание, если вы хотите заключить сделку с этим пользователем, он заблокирован
SergeyPanov, не будет, но ему бы сборку сменить, либо его обновить.
 
Сообщения
313
Реакции
21
Помог
7 раз(а)
Обратите внимание, если вы хотите заключить сделку с этим пользователем, он заблокирован
SergeyPanov, ну сборка старая... Nov 8 2022. Видимо хреново менял.
 
Сообщения
13
Реакции
0
[REUNION]: Query flood blocking: 0 pps (0.000 mbps) from 64+ IPs
с чем может быть связанно, что все по нулям и блокирует всем запросы tsource
 
Сообщения
313
Реакции
21
Помог
7 раз(а)
Обратите внимание, если вы хотите заключить сделку с этим пользователем, он заблокирован
Feel1986, только с магией. Просто используй стабильную версию, а не dev. Либо отключи квары на проверку
 
Сообщения
313
Реакции
21
Помог
7 раз(а)
Обратите внимание, если вы хотите заключить сделку с этим пользователем, он заблокирован
Feel1986, выше дал ответ. Здесь не все так просто. Без заморочек варианта 2.
1. Отключить квары в 0.
2. Использовать стабильную версию реу
 
Сообщения
313
Реакции
21
Помог
7 раз(а)
Обратите внимание, если вы хотите заключить сделку с этим пользователем, он заблокирован
Nordic Warrior, ну на релизной бы таких трабл не было… уже проверено.
 
Последнее редактирование:
Сообщения
91
Реакции
3
how to fix flood ddos attack

[REUNION]: Query flood blocking: 262689 pps (124.100 mbps) from 64+ IPs
[ 2] Reunion RUN - reunion_mm_i386.so v0.1.92d



# EnableQueryLimiter (0 / 1)
# Enable ratelimit for server queries (TSource, players, etc). You can use 0 if external protection solutions used.
EnableQueryLimiter = 1

# QueryFloodBanTime (0 - 60).
# Ban time in minutes for server query flooding. Use 0 to disable bans (block only).
QueryFloodBanTime = 60

# QueryFloodBanLevel (320 - 2048).
# Queries/sec level for ip ban. Maximum measured legit level is 80/sec.
# Default: 400
QueryFloodBanLevel = 320
 
Сообщения
53
Реакции
12
Как сделать так, что бы игроки с 47 протоколом не могли заходить на сервер?
В reunion.cfg, в строке cid_NoSteam47 = 3, нужно выставить значение 5? Я правильно понимаю?
Или нужно еще что то сделать?
 
Сообщения
4
Реакции
0
Hi, I am having an issue with my server. Despite boosting the server, I am not getting any players, just barely 3 or 4 players. Did I do something wrong?

Привет, у меня возникла проблема с моим сервером. Несмотря на бустинг сервера, у меня почти нет игроков, всего 3 или 4 человека. Я что-то делаю неправильно?

# ========================================================
# REUNION CONFIGURATION
# ========================================================

#
# General rule for modifying this file:
# DONT CHANGE ANYTHING IF YOU DONT KNOW WHAT IT MEANS!
#


# ========================================================
# AUTHID MANAGEMENT
# ========================================================

# ClientID types (for cid_* options)
# 1: Real (or generated by HW) steam (STEAM_xx:xx:xx)
# 2: Real (or generated by HW) valve (VALVE_xx:xx:xx)
# 3: STEAM_ by IP
# 4: VALVE_ by IP
# 5: Deprecated - client will be rejected
# 6: reserved for future use
# 7: HLTV
# 8: STEAM_ID_LAN
# 9: STEAM_ID_PENDING
# 10: VALVE_ID_LAN
# 11: VALVE_ID_PENDING
# 12: STEAM_666:88:666

# Use these options to set authid's for clients

### AUTH CONTROL ###

# For Legit Steam clients (default is real STEAM_xx:xx:xx [1])
cid_Steam = 1

# Client recognized as pending when they sucessfully authorized, but did not get steam id
# REMARK: Actually, it got steamid, but it is useless (STEAM_0:0:0 for example)
# default is STEAM_ID_PENDING [9]
cid_SteamPending = 5

# for HLTV (default is HLTV [7])
cid_HLTV = 5

# for p.47 clients that do not support unique id generation (default is STEAM_ID_LAN [8])
cid_NoSteam47 = 5

# for p.48 clients that do not support unique id generation (default is VALVE_ID_LAN [10])
cid_NoSteam48 = 5

# For players having revEmu ( >= 9.74) on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_RevEmu = 1

# For players having RevEmu 2013 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_RevEmu2013 = 1

# For players having SteamClient 2009 / revEmu > 9.82 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SC2009 = 1

# For players having old revEmu on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_OldRevEmu = 1

# For players having hCupa's SteamEmu on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SteamEmu = 1

# For players having AVSMP (Cracked Steam) on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_AVSMP = 1

# For SETTI ServerScanner
# default is STEAM_xx:xx:xx generated by IP [3]
cid_Setti = 3

# For SXEI Clients
# default is real STEAM_xx:xx:xx [1]
cid_SXEI = 1

# For players having SmartSteamEmu > 1.2.4 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SSE3 = 1


### AUTH SETTINGS ###

# ServerInfoAnswerType (0/1/2)
# Sets server answer type for query requests
# 0 = New style (Source Engine)
# 1 = Old Style (Fix favorites list for p.47 clients)
# 2 = Hybrid mode - Server is visible anywhere, but there are 3 packets generated for every serverinfo request
ServerInfoAnswerType = 2

# EnableSXEIdGeneration (0 / 1)
# Turns on steamid generation based on info sent by sXeI client
# Enable this ONLY if you have sXeI server installed!
EnableSXEIdGeneration = 0

# SC2009_RevCompatMode (0 / 1)
# Enable fix to make steamids generated for SC2009 compatible with revEmu
SC2009_RevCompatMode = 1

# SteamIdHashSalt (string)
# Salt string for SteamIDs hashing. Irreversibly changes SteamIDs. Applies only to SteamIDs generated by emulators.
# Should be more than 16 chars length. If string is empty, hashing is not applied.
SteamIdHashSalt =

# SteamIdHashDProtoCompat (0 / 1)
# Use less reliable method of SteamID hashing from dproto (deprecated).
SteamIdHashDProtoCompat = 0

# EnableGenPrefix2 (0 / 1)
# Enable second prefix (0 or 1) for generated by HW authids. Reduces chance of authid collisions. Works only with configured SteamIdHashSalt.
EnableGenPrefix2 = 0

# FixBuggedQuery (0 / 1)
# Enable fix for clients with bugged serverbrowser. Prevents hanging on connect.
FixBuggedQuery = 1

# HLTVExcept_IP (ip addr)
# HLTV from this IP will be able to join the server even if cid_HLTV is set to 5 (deprecated)
HLTVExcept_IP = 127.0.0.1

# EnableQueryLimiter (0 / 1)
# Enable ratelimit for server queries (TSource, players, etc). You can use 0 if external protection solutions used.
EnableQueryLimiter = 1

# QueryFloodBanTime (0 - 60).
# Ban time in minutes for server query flooding. Use 0 to disable bans (block only).
QueryFloodBanTime = 1

# QueryFloodBanLevel (320 - 2048).
# Queries/sec level for ip ban. Maximum measured legit level is 80/sec.
# Default: 400
QueryFloodBanLevel = 400

### AUTHID PREFIXES ###

# IPGen_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by IP
IPGen_Prefix1 = 0

# IPGen_Prefix2 (int)
# STEAM_a:b:c
# second prefix (b) for authids generated by IP
IPGen_Prefix2 = 4

# Native_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by native auth method (Steam)
Native_Prefix1 = 0;

# RevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by RevEmu
RevEmu_Prefix1 = 1;

# RevEmu2013_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by RevEmu2013
RevEmu2013_Prefix1 = 1;

# SC2009_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by Steamclient 2009
SC2009_Prefix1 = 1;

# OldRevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by old RevEmu
OldRevEmu_Prefix1 = 2;

# SteamEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by SteamEmu
SteamEmu_Prefix1 = 3;

# SteamEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for AVSMP Clients (Cracked steam)
AVSMP_Prefix1 = 4;

# Setti_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for Setti server scanner
Setti_Prefix1 = 5;

# SXEI_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for sXeI clients
SXEI_Prefix1 = 6;

# SSE3_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for SSE3
SSE3_Prefix1 = 7;

# Note that banid will use steamid WITHOUT any prefixes!


# ========================================================
# OTHER STUFF
# ========================================================

# LoggingMode:
# 0 = None
# 1 = Console
# 2 = Log Files
# 3 = Both
LoggingMode = 0

1717864826846.png
 
Сообщения
270
Реакции
43
Помог
5 раз(а)
Hi, I am having an issue with my server. Despite boosting the server, I am not getting any players, just barely 3 or 4 players. Did I do something wrong?

Привет, у меня возникла проблема с моим сервером. Несмотря на бустинг сервера, у меня почти нет игроков, всего 3 или 4 человека. Я что-то делаю неправильно?

# ========================================================
# REUNION CONFIGURATION
# ========================================================

#
# General rule for modifying this file:
# DONT CHANGE ANYTHING IF YOU DONT KNOW WHAT IT MEANS!
#


# ========================================================
# AUTHID MANAGEMENT
# ========================================================

# ClientID types (for cid_* options)
# 1: Real (or generated by HW) steam (STEAM_xx:xx:xx)
# 2: Real (or generated by HW) valve (VALVE_xx:xx:xx)
# 3: STEAM_ by IP
# 4: VALVE_ by IP
# 5: Deprecated - client will be rejected
# 6: reserved for future use
# 7: HLTV
# 8: STEAM_ID_LAN
# 9: STEAM_ID_PENDING
# 10: VALVE_ID_LAN
# 11: VALVE_ID_PENDING
# 12: STEAM_666:88:666

# Use these options to set authid's for clients

### AUTH CONTROL ###

# For Legit Steam clients (default is real STEAM_xx:xx:xx [1])
cid_Steam = 1

# Client recognized as pending when they sucessfully authorized, but did not get steam id
# REMARK: Actually, it got steamid, but it is useless (STEAM_0:0:0 for example)
# default is STEAM_ID_PENDING [9]
cid_SteamPending = 5

# for HLTV (default is HLTV [7])
cid_HLTV = 5

# for p.47 clients that do not support unique id generation (default is STEAM_ID_LAN [8])
cid_NoSteam47 = 5

# for p.48 clients that do not support unique id generation (default is VALVE_ID_LAN [10])
cid_NoSteam48 = 5

# For players having revEmu ( >= 9.74) on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_RevEmu = 1

# For players having RevEmu 2013 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_RevEmu2013 = 1

# For players having SteamClient 2009 / revEmu > 9.82 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SC2009 = 1

# For players having old revEmu on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_OldRevEmu = 1

# For players having hCupa's SteamEmu on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SteamEmu = 1

# For players having AVSMP (Cracked Steam) on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_AVSMP = 1

# For SETTI ServerScanner
# default is STEAM_xx:xx:xx generated by IP [3]
cid_Setti = 3

# For SXEI Clients
# default is real STEAM_xx:xx:xx [1]
cid_SXEI = 1

# For players having SmartSteamEmu > 1.2.4 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SSE3 = 1


### AUTH SETTINGS ###

# ServerInfoAnswerType (0/1/2)
# Sets server answer type for query requests
# 0 = New style (Source Engine)
# 1 = Old Style (Fix favorites list for p.47 clients)
# 2 = Hybrid mode - Server is visible anywhere, but there are 3 packets generated for every serverinfo request
ServerInfoAnswerType = 2

# EnableSXEIdGeneration (0 / 1)
# Turns on steamid generation based on info sent by sXeI client
# Enable this ONLY if you have sXeI server installed!
EnableSXEIdGeneration = 0

# SC2009_RevCompatMode (0 / 1)
# Enable fix to make steamids generated for SC2009 compatible with revEmu
SC2009_RevCompatMode = 1

# SteamIdHashSalt (string)
# Salt string for SteamIDs hashing. Irreversibly changes SteamIDs. Applies only to SteamIDs generated by emulators.
# Should be more than 16 chars length. If string is empty, hashing is not applied.
SteamIdHashSalt =

# SteamIdHashDProtoCompat (0 / 1)
# Use less reliable method of SteamID hashing from dproto (deprecated).
SteamIdHashDProtoCompat = 0

# EnableGenPrefix2 (0 / 1)
# Enable second prefix (0 or 1) for generated by HW authids. Reduces chance of authid collisions. Works only with configured SteamIdHashSalt.
EnableGenPrefix2 = 0

# FixBuggedQuery (0 / 1)
# Enable fix for clients with bugged serverbrowser. Prevents hanging on connect.
FixBuggedQuery = 1

# HLTVExcept_IP (ip addr)
# HLTV from this IP will be able to join the server even if cid_HLTV is set to 5 (deprecated)
HLTVExcept_IP = 127.0.0.1

# EnableQueryLimiter (0 / 1)
# Enable ratelimit for server queries (TSource, players, etc). You can use 0 if external protection solutions used.
EnableQueryLimiter = 1

# QueryFloodBanTime (0 - 60).
# Ban time in minutes for server query flooding. Use 0 to disable bans (block only).
QueryFloodBanTime = 1

# QueryFloodBanLevel (320 - 2048).
# Queries/sec level for ip ban. Maximum measured legit level is 80/sec.
# Default: 400
QueryFloodBanLevel = 400

### AUTHID PREFIXES ###

# IPGen_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by IP
IPGen_Prefix1 = 0

# IPGen_Prefix2 (int)
# STEAM_a:b:c
# second prefix (b) for authids generated by IP
IPGen_Prefix2 = 4

# Native_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by native auth method (Steam)
Native_Prefix1 = 0;

# RevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by RevEmu
RevEmu_Prefix1 = 1;

# RevEmu2013_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by RevEmu2013
RevEmu2013_Prefix1 = 1;

# SC2009_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by Steamclient 2009
SC2009_Prefix1 = 1;

# OldRevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by old RevEmu
OldRevEmu_Prefix1 = 2;

# SteamEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by SteamEmu
SteamEmu_Prefix1 = 3;

# SteamEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for AVSMP Clients (Cracked steam)
AVSMP_Prefix1 = 4;

# Setti_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for Setti server scanner
Setti_Prefix1 = 5;

# SXEI_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for sXeI clients
SXEI_Prefix1 = 6;

# SSE3_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for SSE3
SSE3_Prefix1 = 7;

# Note that banid will use steamid WITHOUT any prefixes!


# ========================================================
# OTHER STUFF
# ========================================================

# LoggingMode:
# 0 = None
# 1 = Console
# 2 = Log Files
# 3 = Both
LoggingMode = 0

where are you boosting ?
 
Сообщения
4
Реакции
0
download from them cs client and try to connect in to server your. maybe just their boost shit. I think have nothing to do with the reunion
We had no issues connecting with his game client. However, gt.rs reports that our host (OVH) has anti-DDoS filters blocking players, limiting server visibility.
Can you recommend a good boosting service provider? This is truly frustrating.
 

Пользователи, просматривающие эту тему

Сейчас на форуме нет ни одного пользователя.
Сверху Снизу