AntiIdleBot 2.0.0

[egcmasti]

[USER = 276] egcmasti [/ USER], for version 1.1.0 use the orpheu configs from the version 1.1.0 archive. There is no need to modify these configs in any way.
If everything works correctly and without changing the configs, then it's good. I have not tested this point.

Massive "warned?" when changing cards - normal behavior.

and using the config archive from 1.1.0 .

 

[egcmasti]

This behaviour is also normal?

L 09/30/2021 - 13:18:24: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:24: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:24: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:26: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:26: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:27: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:27: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:36: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:36: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:38: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:38: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:41: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:41: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:42: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:42: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:43: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:43: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:45: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:45: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:46: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:46: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:47: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:47: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:49: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:49: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:50: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:50: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:52: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:52: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:56: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:56: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:58: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:58: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:59: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:59: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:19:00: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:19:00: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:19:01: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:19:01: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:19:02: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:19:02: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:19:03: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:19:03: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:19:04: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:19:04: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:19:05: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:19:05: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:19:06: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:19:06: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:19:07: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:19:07: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:19:08: [AIB DEBUG] SV_ConnectClient_Pre()

 

[BlackSignature]

egcmasti, нет, между Pre и Post должен отрабатывать Con_Printf. Видимо у тебя та же ситуация, что и у r1nk0
Хорошо бы понять, что к такому поведению приводит.

 

[egcmasti]

[USER = 276] egcmasti [/ USER], no, Con_Printf should work between Pre and Post. Apparently you have the same situation as [USER = 1401] r1nk0 [/ USER]
It would be nice to understand what leads to this behavior.

same issue both have now. i did all accroding to the guides and updated with the config archive..

There is no indication of any errors or pointer so we can solve.

 

[BlackSignature]

egcmasti, orpheu config
в консоль сервера. какой ответ?

Странная ситуация. Варианта два. Или в принципе не срабатывает Con_Printf, или отшибает условие " connected, address "
Там проблема отдебажить в том, что при попытке вставить дебаг выше условия сервер в краш уходит. Я не знаю как это отлаживать :(

 

[egcmasti]

egcmasti, orpheu config
to the server console. what answer?

Strange situation. There are two options. Or, in principle, Con_Printf does not work, or the condition "connected, address"
There the problem to debug is that when you try to insert a debug above the condition, the server crashes. I don't know how to debug this :(
Orpheu libraries search started.

Adding library metamod (0x0xf2f3e000)
Adding library SafeNameAndChat (0x0xf2ba0000)
Adding library reunion_mm (0x0xf2b65000)
Adding library rechecker_mm (0x0xf2b3f000)
Adding library reauthcheck_mm (0x0xf2b16000)
Adding library resemiclip_mm (0x0xf2b04000)
Adding library resrdetector_mm (0x0xf2aeb000)
Adding library amxmodx_mm (0x0xf28fd000)
Adding library mysql_amxx (0x0xf25c0000)
Adding library whblocker_mm (0x0xf24ec000)
Adding library fakemeta_amxx (0x0xf2495000)
Adding library nvault_amxx (0x0xf2486000)
Adding library cstrike_amxx (0x0xf246b000)
Adding library hamsandwich_amxx (0x0xf23f8000)
Adding library csx_amxx (0x0xf20b0000)
Adding library iphubclient_amxx (0x0xf1f75000)
Adding library geoip_amxx (0x0xf23cf000)
Adding library regex_amxx (0x0xed8fb000)
Adding library reaimdetector_amxx (0x0xf23b6000)
Adding library engine_amxx (0x0xf239d000)
Adding library orpheu_amxx (0x0xed881000)
Adding library fun_amxx (0x0xed873000)
Adding library reapi_amxx (0x0xed7d6000)
Adding library libpulsecommon-12.2 (0x0xe9f6e000)

Orpheu libraries search ended.

Orpheu functions search started.

Parsing functions started.

Parsing file "Con_Printf" started
Argument type "char *" validated
Argument type "char *" validated
Parsing file "Con_Printf" ended
Parsing file "SV_ConnectClient" started
Parsing file "SV_ConnectClient" ended
Parsing functions ended.


Orpheu functions search ended.

Orpheu virtual functions search started.

Parsing virtual functions started.


Parsing virtual functions ended.

Orpheu virtual functions search ended.

Orpheu memory structures search started.

Parsing memory structures started.


Parsing memory structures ended.

Orpheu memory structures search ended.

30 Сен 2021

egcmasti, orpheu config
to the server console. what answer?

Strange situation. There are two options. Or, in principle, Con_Printf does not work, or the condition "connected, address"
There the problem to debug is that when you try to insert a debug above the condition, the server crashes. I don't know how to debug this :(

Orpheu functions search started.

Parsing functions started.

Parsing file "Con_Printf" started
Argument type "char *" validated
Argument type "char *" validated
Parsing file "Con_Printf" ended
Parsing file "SV_ConnectClient" started
Parsing file "SV_ConnectClient" ended
Parsing functions ended.


Orpheu functions search ended.

 

[BlackSignature]

This behaviour is also normal?

L 09/30/2021 - 13:18:24: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:24: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:24: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:26: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:26: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:27: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:27: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:36: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:36: [AIB DEBUG] SV_ConnectClient_Post()
L 09/30/2021 - 13:18:38: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 13:18:38: [AIB DEBUG] SV_ConnectClient_Post()

это весь лог? там же должен быть ещё client_connect()
Я понимаю ещё Con_Printf() отваливается. а client_connect() то куда делся...

 

[egcmasti]

egcmasti, orpheu config
в консоль сервера. какой ответ?

Странная ситуация. Варианта два. Или в принципе не срабатывает Con_Printf, или отшибает условие " connected, address "
Там проблема отдебажить в том, что при попытке вставить дебаг выше условия сервер в краш уходит. Я не знаю как это отлаживать :(

Orpheu libraries search started.

Adding library metamod (0x0xf2f3e000)
Adding library SafeNameAndChat (0x0xf2ba0000)
Adding library reunion_mm (0x0xf2b65000)
Adding library rechecker_mm (0x0xf2b3f000)
Adding library reauthcheck_mm (0x0xf2b16000)
Adding library resemiclip_mm (0x0xf2b04000)
Adding library resrdetector_mm (0x0xf2aeb000)
Adding library amxmodx_mm (0x0xf28fd000)
Adding library mysql_amxx (0x0xf25c0000)
Adding library whblocker_mm (0x0xf24ec000)
Adding library fakemeta_amxx (0x0xf2495000)
Adding library nvault_amxx (0x0xf2486000)
Adding library cstrike_amxx (0x0xf246b000)
Adding library hamsandwich_amxx (0x0xf23f8000)
Adding library csx_amxx (0x0xf20b0000)
Adding library iphubclient_amxx (0x0xf1f75000)
Adding library geoip_amxx (0x0xf23cf000)
Adding library regex_amxx (0x0xed8fb000)
Adding library reaimdetector_amxx (0x0xf23b6000)
Adding library engine_amxx (0x0xf239d000)
Adding library orpheu_amxx (0x0xed881000)
Adding library fun_amxx (0x0xed873000)
Adding library reapi_amxx (0x0xed7d6000)
Adding library libpulsecommon-12.2 (0x0xe9f6e000)

Orpheu libraries search ended.

Orpheu functions search started.

Parsing functions started.

Parsing file "Con_Printf" started
Argument type "char *" validated
Argument type "char *" validated
Parsing file "Con_Printf" ended
Parsing file "SV_ConnectClient" started
Parsing file "SV_ConnectClient" ended
Parsing functions ended.


Orpheu functions search ended.

Orpheu virtual functions search started.

Parsing virtual functions started.


Parsing virtual functions ended.

Orpheu virtual functions search ended.

Orpheu memory structures search started.

Parsing memory structures started.


Parsing memory structures ended.

Orpheu memory structures search ended.

30 Сен 2021

is this the whole log? there should also be client_connect ()
I also understand Con_Printf () falls off. and client_connect () then where did it go ...

not whole log

attached log.

 

[BlackSignature]

egcmasti, раньше не было такой проблемы (до 1.1.0) ? Похоже на какой-то баг. Я попытаюсь отладить конечно.

 

[egcmasti]

[USER = 276] egcmasti [/ USER], there was no such problem before (before 1.1.0)? It looks like some kind of bug. I'll try to debug of course.

i just started to debug :) after i learn how to enable in config/plugins_antibotidle i put this

aib_debug_mode "1"

before it was 0 thats why antidebug log was 0 size.

 

[BlackSignature]

egcmasti, У меня складывается впечатление, что такое поведение - норма. Я попробую отладить, разобраться. Просто в SV_ConnectClient() клиент может быть выброшен по ряду условий, т.е. процесс не дойдёт до " connected, address ".

Т.е. я думаю что записи в логе без Con_Printf() - это те кто в итоге на сервер не вошёл в любом случае в рамках рассматриваемого подключения.
На это как раз указывает отсутствие client_connect() в таких случах.

 

[egcmasti]

[USER = 276] egcmasti [/ USER], I get the impression that this behavior is the norm. I'll try to debug, figure it out. It's just that in SV_ConnectClient () the client can be dropped due to a number of conditions, i.e. the process will not get to "connected, address".

yes need to figure out but if there was a problem server crashed in my case everything is fine no errors. just some minor bug can be fixed after looking.

 

[BlackSignature]

egcmasti, да, это нормальное поведение. При попытке подключиться к полному серверу (2/2) 3-им клиентом я получаю на клиенте "Server is full." и

L 09/30/2021 - 11:55:25: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 11:55:25: [AIB DEBUG] SV_ConnectClient_Post()

https://github.com/dreamstalker/rehlds/blob/aaffe43e3e7a99f267b29ed84d7405a989242052/rehlds/engine/sv_main.cpp#L2385

https://github.com/dreamstalker/rehlds/blob/aaffe43e3e7a99f267b29ed84d7405a989242052/rehlds/engine/sv_main.cpp#L2257

 

[egcmasti]

[USER = 276] egcmasti [/ USER], yes, this is normal behavior. When I try to connect to a full server (2/2) by the 3rd client, I get on the client "Server is full." and

L 09/30/2021 - 11:55:25: [AIB DEBUG] SV_ConnectClient_Pre()
L 09/30/2021 - 11:55:25: [AIB DEBUG] SV_ConnectClient_Post()

https://github.com/dreamstalker/rehlds/blob/aaffe43e3e7a99f267b29ed84d7405a989242052/rehlds/engine/sv_main.cpp#L2385

https://github.com/dreamstalker/rehlds/blob/aaffe43e3e7a99f267b29ed84d7405a989242052/rehlds/engine/sv_main.cpp#L2257

Ok so we can ignore this . everything is good then.

 

[raulitop]

BlackSignature take a look to the comment here:

https://github.com/s1lentq/reapi/issues/218

 

[BlackSignature]

raulitop, that guy is right. for this plugin we need ClientConnected as reapi hook.

 

[mazdan]

BlackSignature, читать байты плагином вместо того чтобы написать сигнатуру в файле орфея, чтобы модуль сканировал, это зачем так делать?
Сигнатура "E8 ? ? ? ? EB 55" это слишком коротко.
Дело ваше конечно, иля я может чего-то недопонял, только краем глаза смотрел в код.

 

[raulitop]

raulitop, that guy is right. for this plugin we need ClientConnected as reapi hook.

Well, someone does it. Support him

https://github.com/s1lentq/reapi/pull/223

 

[BlackSignature]

mazdan, Идея Гарея была в том чтоб сигнатуры там перебирать пока не найдётся подходящая (или брать из версии движка сопоставлением). Я так понял они не универсальны всё равно.

Сейчас не очень со временем. Я обращу на твоё решение внимание попозже, спасибо.

 

[X-Tream]

This guys from www.intrusii.ro insert the bots on the servers. They wanted to be TOP 1 in gametracker.com with this kind of shit things. Our community have also problems with them!!!